Tines to match most any reel on the market and deliver more grain to the combine!
HCC has a variety of tines that will replace most worn out components to make sure you get the most out of your harvest.
Polytine Reels have a teardrop shaped metal bat with notches spaced 4-1/2" (114 mm) apart. The tines fit into notches and are fastened to the back of the metal bat approximately 3" (76 mm) above the notch.
The Love Reel has a sheet metal bat, and the tine fastens over the bottom edge. There is a projection that fits into a hole on the front of the bat approximately 2-1/2" (64 mm) above the edge.
ML Reels have a 1-3/8" (35 mm) tube with 3/8" (10 mm) round holes spaced approximately 4-1/2" (114 mm) apart. The tines have a round nub that fits into a round hole in the tube.
Level II Reels have a 1-3/8" (35 mm) tube with 1/2" (12.7 mm) hex holes spaced 6" (152 mm) apart. The tines have a hex nub that fits into a hex hole in the tube.
Wood Bat Reels have a wood bat with steel tines spaced approximately 4-1/2" (114 mm) apart. The tines are pressed into the bat, and there is a metal clip riveted to the bat to provide support to the tine.
Ordering
For more information, or to place an order, please see your nearest farm equipment dealer or contact the HCC distributor for your area.
